en English
en Englishfr Frenchpt Portuguesees Spanish

KAPUT! EZ Packets


Kaput! provides odor and stain removing solutions for carpet and more. We offer Kaput! in packets, bulk economy jars and pre-mixed, dilutable liquid gallon solutions.

Mix one packet with two gallons of water, allow approximately 20 minutes to activate (you can also premix in advance), apply, allow dwell time and clean.

Kaput! does an amazing job at removing odor.

Please read instructions and warning labels carefully prior to using Kaput! as well as our FAQ below.

Kaput! EZ Packs qualify for extended flat rate shipping – 12 gallon (6 qty packs) ship for $4.95 and 24 gallon (12 qty packs) ship for $6.95

SKU: N/A Category:


Sodium Chlorite powder – SDS


What is Kaput?

Kaput is a strong oxidizer consisting of stabilized chlorine dioxide (derived from sodium chlorite) that is used for many applications including organic odor and stain removal.

How does it work? 

Empty contents into a two gallon container similar to this: https://www.amazon.com/CSBD-Containers-Construction-Residential-Commercial/dp/B08617J9TC/

Allow the product to activate for about 20 minutes (you can also pre-mix in advance), apply evenly to surface. Must have approximately 15 – 30 minute contact time and follow with your standard cleaning process (see below for additional questions regarding cleaning). Please read complete instructions and warning labels prior to use.

How much should I mix?

The EZ Pour packets are measured for 1 – 2 gallon mixes. In virtually every instance  – even with heavy odor – you will get great results diluting at 2 gallons per packet.

How long does it take to work?

You’ll notice an immediate improvement. However, complete odor elimination will take longer, sometimes up to 2 – 3 days.

Can I use this with all carpet cleaning methods?


Why is there sometimes a strong oxidizing odor after applying Kaput!?

This is a reaction of the product oxidizing organics – particularly urine. The more severe the urine is, the stronger the product will react. This will dissipate once the odor source has been completely broken down.

Will it discolor carpet? 

We always suggest testing an area first. Use provided contents at recommended dilution.

Can I add to my cleaning product?

You can, but allow for proper contact time and we suggest using a neutral or high neutral non-peroxide cleaner. Always test prior to use to make sure the two products are compatible. Do not mix with incompatible properties such as acids.

Can I add peroxide?

This is typically not needed or recommended. We suggest a stand alone application of peroxide (such as Go-Oxy) for stubborn stains using a light, topical application.

How long will it last?

Product has an approximate 1 year shelf life when stored at average room temperature.

How should this be stored?

Store in a closed container in a well ventilated area at normal room temperature.

Is this better than a liquid CLO2 product?

Both are equally effective if used at the same or similar concentration. The dry product is used to produce a liquid product that you can then apply. You can mix packets and bulk product in advance if you prefer saving activation time in the process. Some end users prefer the convenience and ease of use of a ready-to-dilute liquid product, while others prefer the economy of packets and jars. All variations provide a low cost odor removal solution. When using Econo Jars be sure to measure accurately – this is an absolute must. 

KAPUT! Warning

Additional information


6 gallons, 12 gallons, 24 gallons